You may have a few questions, and hopefully the following will provide answers. If not, fill out our contact form, and we'll be glad to help you.
Q: How many layers of vinyl film can be applied?
A: The warranty covers up to 2 layers of film. Several colors may be used in making a graphic. These may be cut with an overlap so that while you may have used four colors you are still only two layers deep.
Q: Can Dickson Graphic System graphics be applied to an existing awning?
A: This system was developed for new awnings. The graphics are applied to the Sunbrella or Dickson fabric before attaching to the awning frame. As far as taking an existing awning off its frame and trying to apply graphics, the warranty would not apply since dirt, pollution, or other elements could prevent proper adhesion of the film to the fabric.
Q: How can I clean an awning graphic applied with the Dickson Graphic System?
A: You would clean the awning with the same solution (mild soap and water) as other Sunbrella applications. Use mild soap and water applied with a sponge or soft brush. Do not use a strong scrubbing motion. Do not use a power sprayer/washer. While still on the frame, the graphics portion of the awning should be cleaned by washing/brushing from the vinyl portion out, away from the edge of the vinyl. This will help to prevent damaging the "edge" of the graphics which could lead to "lift off." Rinse thoroughly with clean water.
Q: Can a photographic image or complex logo be applied with the Dickson Graphics System?
A: For a complex image or photograph, digital printing would probably be the best option. It is possible to print on 3M IJ 180-10 film with a solvent, eco solvent or UV ink printer and apply it the same way you would the standard 7725/7125 films. It is also possible to use 3M 8519 or 8520 Clear Protective overlaminate on top of this for greater outdoor durability.